WEGO™ 5 System | Daytona Sensors™

Find a Dealer and Buy Now

New Software Snapshots Image Go Here
Best of all, Daytona Sensor™ products are covered by a One-Year Limited Factory-Backed Warranty.

New Product Detail Goes Here
Best of all, Daytona Sensor™ products are covered by a One-Year Limited Factory-Backed Warranty.

Product Bullet Points Go Here
Product Bullet Points Go Here
Product Bullet Points Go Here
Product Bullet Points Go Here
Product Bullet Points Go Here

Product Part # & Bullet Specs Go Here

The Best Engine Control Products for Performance and Racing Enthusiasts

Part #115005
CD Ignition Tach Adapter For All WEGO™ Systems
(Click Here For Tech Details)

Product Part # & Bullet Specs Go Here

Part #115026
Grounded 12 Foot Extension Cable All WEGO™ Chassis Dyno Systems
(Click Here For Tech Details)

Read What 'Real-People' Are Saying About Daytona Sensors™ - Click Here

Part #115007
Oxygen Sensor Weld Bung
18 x 1.5 mm Thread - Stainless Steel
(Click Here For Tech Details)

Need Technical Help?
Contact The Factory Today!
386-322-7390 (9AM - 4PM EST)
Monday - Friday or Email Us At:

Part #115001
Wide-band Exhaust Gas Oxygen Sensor
(Click Here For Tech Details)

Product Specs - WEGO™ 5 System - Dual Channel Interface w/CAN Bus

techsupport@daytona-sensors.com

New Product Detail Goes Here

Multiple Spark Duration: N/A
PC Programmable: Yes
Data Acquisition: Yes Internal 16 Mbit Data Flash Memory
USB Interface: Yes – Cable Included
Timing Advance: Yes – RPM based advance curve or 3D timing map based on RPM and manifold pressure
Voltage Primary Output (To Coil): 520-540 Volts
Voltage Secondary Output (Coil Output): 45,000+ Volts
Spark Output (millijoules): 135 Millijoules
Current Draw: Less than 5 Amps at 8,000 rpm
Minimum Operating Voltage: 7 V
Maximum Operating Voltage: 18 V
Coil Included: Yes

Coil Length (in): 4.400 in.
Coil Height (in): 3.000 in.
Coil Width (in): 3.200 in.
Ignition Box/Coil Color: Black/Black
Ignition Box Length (in): 7.000 in.
Ignition Box Height (in): 1.900 in.
Ignition Box Width (in): 5.250 in.
Total Weight: 7lbs (Box, Coil and Harness)
Warranty: 1-Year Limited Factory Warranty
Quantity: Sold as One Complete Kit
CARB EO Number: N/A
Emissions: * Not Legal for sale or use in California or on pollution controlled vehicles

WEGO™ 5 System - Dual Channel Interface w/CAN Bus

Part #115025
Grounded Wide-Band Exhaust Gas Oxygen Sensor For WEGO™ Chassis Dyno System Kits
(Click Here For Tech Details)

Find A U.S. Dealer

Click Link Below
(Opens A Pop-Up Window
To Enter Your Zip Code)

Part Number: 104003
UPC: TBA
Part Type: Ignition System Kit
Application: Sportsman Classes of NHRA™ Drag Racing
Engine Applications: All 4-6-8 Cylinder Engines including Even and Odd-fire V6
Ignition Box Output: Capacitive discharge
Circuitry: Digital
Rev Limiter: Yes – Launch, Burnout & Max RPM with 100 RPM Steps
Start Retard: Yes – Programmable Zero to -10 Degrees
Timing Retard: Built-in starting retard programmable for under 450 RPM and high-speed adjustable retard optional (-22 degrees max)
RPM Activated Switch: Yes
General Purpose Input/Output Terminals: Yes – Three (3)

New Product Detail Goes Here
Best of all, Daytona Sensor™ products are covered by a One-Year Limited Factory-Backed Warranty.

Use For In ????

Type of Racing

Learn How Daytona Sensors™
WEGO™ Systems Compare To Each Other - Click Here

Part #115020
WEGO™ Power Supply (120-240VAC) For Dyno System Kits
(Click Here For Tech Details)

Click Here To Find A Daytona Sensors Dealer

Subscribe To Our Daytona Sensors™ eNewsletter

Part #
Goes Here

Test Drive CD-1™ Software Before You Buy It! Click To Enlarge/Scroll Images and Click Link To Download Sample Software

Part #115015
Inductive Ignition Tach Adapter For All WEGO™ Systems
(Click Here For Tech Details)

Test Drive Any Of Our Software Before You Buy! Click Here

Part #115014
Inductive Tach Adapter For All WEGO™ Systems
(Click Here For Tech Details)

WEGO™ 5 System - Dual Channel Interface w/CAN Bus

Part #115004
12 foot Extension Cable For All WEGO™ Systems
(Click Here For Tech Details)

Part #115009
18 Foot Extension Cable For
All WEGO™ Systems

(Click Here For Tech Details)

Overview - WEGO™ 5 System - Dual Channel Interface w/CAN Bus

Options & Replacement Parts For WEGO™ 5 System - Dual Channel Interface w/CAN Bus

Part #115024
24 Foot Extension Cable For
All WEGO™ Systems
(Click Here For Tech Details)

Part #115002*
Oxygen Sensor Bung Plug

18 x 1.5 mm Thread - Mild Steel
(Click Here For Tech Details)

Part #115003
Oxygen Sensor Weld Bung

18 x 1.5 mm Thread - Mild Steel
(Click Here For Tech Details)

Part #115027
Grounded 18 Foot Extension Cable All WEGO™ Chassis Dyno Systems
(Click Here For Tech Details)

The Daytona Sensors™ CD-1™ Kit is a complete capacitive discharge ignition system (with CD-1™ Coil) for 4-6-8 cylinder race engines and is perfect for Sportsman Drag Racing application which use a distributor-based engine.
The Daytona Sensors™ CD-1 Pro™ Ignition Kit is accepted for use in Sportsmen Classes in NHRA® for competition (refer to acceptance letter from NHRA®). The CD-1 Pro™ version has all the same features as the standard CD-1, except that data logging is disabled as required by NHRA®. A distinctive clear anodized housing allows easy identification of the CD-1 Pro™ version.
Produces an output of 135 mJ spark energy and racers can digitally set launch, burnout, and maximum RPM limits with 100 RPM steps from 3,000 to 9,900 RPM (10,900 RPM for maximum RPM limit). The PC programmable advance features ranging from a simple RPM based advance curve to a 3D timing map with boost proportional retard. There are dedicated input terminals for launch RPM and manifold pressure.
Features one general purpose input and two general purpose input/output terminals. Inputs can be programmed for high gear retard, burnout RPM limit, vehicle speed sensor, and throttle position sensor. Outputs can be programmed for RPM window switch, nitrous system activation, and multi-gear shift light functions.
The CD-1™ includes a highly efficient switching power supply based on US Patents #6518733 and #6636021 and will draw less than 5 amps of current at 8,000 RPM. Rated for continuous operation at 8,500 RPM and 85º C (185º F).
The CD-1™ unit is fully encapsulated construction using surface mount electronics and is waterproof and highly resistant to vibration and shock. The unit uses advanced 12 pin Deutsch connector for signal connections and components are a compact size and lightweight.
The CD-1™ Ignition System Kit includes the PC Link software and also a USB cable. PC Link software runs under Microsoft® Windows® XP/Vista/7/8 and Windows® 10. Older Windows® versions and Mac® are not supported. PC Link allows the user to program all the parameters and tables within the CD-1™ system. Minimum PC requirement is a 300 MHz Pentium® with super VGA display (SVGA with 1024 x 768 pixel resolution). The CD-1™ connects to the PC by means of the USB interface supplied with the system. The PC must have a free USB port.
Users can establish setup parameters including function of the general purposes input/output (GPIO) terminals and program advance curves. The CD-1™ allows download and upload to the module, opening and the saving files to disk, and print setup values including graphs for advance curves. Includes a very comprehensive on-line help system. Program allows control strategy based on throttle position, RPM and vehicle speed windows, time delay, and first gear lockout.
Best of all, Daytona Sensor™ products are covered by a One-Year Limited Factory-Backed Warranty.